NEC VH-601, User Manual

Page: 12 / 52

Setting the Video Channel on your TV
12
1
The output channel of the VCR is set at UHF channel 68.
2
Turn on the TV.
3
Turn the VCR on by pressing the OPERATE button.
OPERATE
4
Insert a recorded tape and press PLAY.
PLAY
CH
VIDEO IN L-AUDIO IN-R
OPERATE STOP/
AV2
EJECT
NTSC P
Child - Lock System
5
Tune your TV so that the picture of the playing tape appears on the TV screen.
NOTE: Refer to your TV user’s manual when tuning the video channel.
6
If channel 68 is already occupied on your TV set, or the picture is distorted, you can
change the transmitted channel of the video recorder.
1.
During power off mode (only clock displayed) hold down both the “CH D D ” and
“CH E E ” buttons on the VCR for more than 4 seconds.
Then, “RF C68” will be displayed on the Multi-Function Display.
2.
Press either the “CH D D ” or “CH E E ” buttons on the VCR to select another video
channel, eg. between channels 28 and 67.
3.
Press the “OPERATE” button when you have finished.