- 72 -
Start
Start
Start
Start----Up Problems
Up Problems
Up Problems
Up Problems
The notebook has a built-in checking program that automatically tests its components when you turn the
system power on. This diagnostic test is called the Power-On Self-Test (POST). If the system finds a
problem during the POST, the system displays an error message or emits a series of beep codes when there
are the following conditions:
•
the current configuration information doesn't match configuration information stored in Auto Setup,
such as when an internal option is added.
•
the system loses configuration information.
If the system frequently loses the Setup configuration data, the internal CMOS battery may need to be
replaced at an authorised repair centre.
If You Need Assistance
If You Need Assistance
If You Need Assistance
If You Need Assistance
If you have a problem with your computer, first review the
'Checklist'
and the
'Start-Up Problems'
troubleshooting table. You may also want to check out the
'Frequently Asked Questions'
section.
Note
Reference the
NEC Warranty Card Terms and Conditions
to find out how to contact the local office in your
country.
