- 73 -
Recovery Information for Windows Vista only
Recovery Information for Windows Vista only
Recovery Information for Windows Vista only
Recovery Information for Windows Vista only
Your computer is supplied with a backup partition on the hard disk drive which contains all data you may
need in order to restore your configuration as it was when leaving the factory. This partition occupies about
10 GB of your hard disk drive.
The NEC Recovery Program can restore your computer to the same state as when you purchased it, while
giving you an option to retain all settings and personal data for later retrieval.
The procedure described below is only applicable if your backup data is stored on your computer’s hard disk.
If you wish to restore your computer using Recovery DVD, please see note below.
NEC Recovery Program (from backup partition)
This backup partition is hidden.
Due to the wide range of reasons for which the NEC Recovery Program may be used, no
guarantee can be given that all data will be retained.
You are strongly recommended to create a set of Recovery DVD for future use.
Be ready with 2 blank DVD-R. Please use the
MDVDCreator
tool. Click on the icon at
Start
button
-
All Program
–
MDVDCreator
to launch
MDVDCreato
r program. It will guide you
through the process.
Before you run MDVDCreator program, you need to disable UAC (User Account Control). To do this,
go to
Start
button
-
Control Panel
-
User Account and Family Safety - User Accounts
-
Turn User Account Control on or off
. Then uncheck the “Use User Account Control (UAC) to help
protect your computer”. Click OK button.
