NEC Versa P700 Disassembly Manual
Page 21
Fig. 39:
Disconnecting the CMOS battery
2. Take the battery out of the system and put it aside.
Removing the Plastic Cover
To remove the plastic cover, first remove the keyboard (see
), remove
the LED assy (see
), remove the LCD assembly (see
), remove the Hard disk drive
cover (see
), remove the touchpad assembly (see
), remove the heat plate (see
), then perform the next
steps:
1. Remove the screw on the bottom of the system at the VersaBay location (see picture
below).
Fig. 40:
Removing screw in VersaBay location
2. Remove the screws marked in the next picture
Fig. 41:
Removing the plastic cover
(Cone 2.5X3)
A
(M2x4)
B
(M2.5x5)
