NEC Versa P700 Disassembly Manual
Page 12
Fig. 16:
Releasing the LCD flat cable connector
10. Finally carefully lift away the whole LCD display from the notebook.
Disassembling the LCD display
To disassemble the LCD display, first it has to be removed from the notebook. Refer to the
section
for instructions on how to do that. After removing LCD
display do as follows:
1. Remove the four rubber tabs and the two stickers that seal the retaining screws of the
frame cover.
Fig. 17:
Removing LCD rubber tabs and screw seals
2. Remove the screws discovered by removing the rubber tabs and the stickers in the
previous step.
3. Unclip the LCD front cover from the back LCD cover and put it a side.
A
(M2.5x5)
Sticker
Rubber
A
(M2x5)
B
(M2.5x5)
