2-4 Setup and Operation
2.
If you are running the NEC Versa on AC power, disconnect the AC
adapter cable from the NEC Versa.
NOTE: Before disconnecting power,
save any open files or close open appli-
cations to avoid data loss.
3.
On the back of the NEC Versa, open the expansion port cover and slide it
underneath the expansion port.
Check that all other NEC Versa port covers are closed.
Figure 2-3 NEC Versa Expansion Port Cover
Figure 2-4 Stowing the Expansion Port Cover
4.
Verify that the power cord is plugged into the MiniDock and that
MiniDock power is turned on. (See “Connecting the Power Cable” for
details.)
When the Docking Status LED lights steady amber, power to the Mini-
Dock is turned on and it is ready for docking.
