Setup and Operation 2-3
Figure 2-2 Main Power Switch
!
CAUTION
Disconnecting the power cable, turning off
power by pressing the main Power switch, or ex-
periencing a power outage while running the
MiniDock and NEC Versa can result in a system
crash.
Preparing the NEC Versa for Docking
Follow the procedure given next to prepare the NEC Versa for docking.
1.
Set NEC Versa power for your system as follows.
If you have a Plug and Play NEC Versa, you can either put your sys-
tem into Suspend mode or leave it in full Operation mode for docking.
For example, an NEC Versa with Windows 95 running is a Plug and
Play system.
If you have a non-Plug and Play system, turn off system power before
docking. Systems running Windows for Workgroups or Windows NT
do not support Plug and Play.
NOTE: Make sure your system is in the
appropriate mode for docking.
