NEC Versa LXi Series, Service And Reference Manual

Page: 50 / 95

3-6 Disassembly and Reassembly
2. Remove the screw and bay cover.
Removing the screw and bay cover
3.
Remove the SO-DIMM as follows:
n
Press the locking tabs away from the sides of the SO-DIMM and hold while gently
lifting on the edge of the SO-DIMM.
n
When the edge of the SO-DIMM pops up and is at approximately a 60 degree angle,
pull the SO-DIMM from the socket.
Removing an installed SO-DIMM
Hard Disk Drive
Use the following procedure to remove the hard disk drive. This procedure assumes the battery
has been removed from the system.
1.
Close the LCD and turn over the system.