Field Service Guidelines 13
Install DIMMs as follows:
1.
Remove the keyboard as described in the preceding section.
2.
Locate the lock notches and alignment key on the DIMM.
Figure 4-11 DIMM Features
3.
Locate the DIMM expansion port.
4.
Hold the DIMM at a 45 degree angle and align the DIMM contacts with
the socket in the system. Push the connector into the socket.
5.
Press down on the edge of the DIMM opposite the contacts until the lock
tabs on the sides snap into place, securing the module.
Figure 4-12 Installing the DIMM
