2-30 Setup and Operation
Setup Menus
Read the following descriptions for an explanation of each item that appears in the Setup
menus, as listed in the preceding table.
Standard CMOS Setup
When you select the Standard CMOS Setup screen you will see System Time and System
Date parameters as well as drive parameters.
Date — This field lets you set your NEC Versa’s calendar month, day and year.
The calendar clock is year 2000-compliant. These settings remain in memory even
after you turn off system power.
To set the date use the
Tab
or arrow keys to move from field to field. Use the
PgUp
or
PgDn
key to change the numbers within each field.
Time — To set the time, enter the current hour, minute, and second in hr/min/sec,
24-hour format.
To set the time use the
Tab
or arrow keys to move from field to field. Use the
PgUp
or
PgDn
key to change the numbers within each field.
Diskette Drives — The diskette drive parameters let you check and change set-
tings for your diskette drives.
Internal Hard Disk Drive — This field allows you to enable or disable the internal
hard drive in your system. You can also define primary master and slave drives.
Docking Station Drives — This field lets you enable and disable the hard drives
installed in a docking station. You can also specify the docking station hard drive
as the boot drive. (These options are only available when the NEC Versa is
docked.)
System Memory — Two fields display the amount of system memory and ex-
panded memory installed in your system. These are display-only fields. The system
automatically senses the amount of installed memory.
