Field Service Guidelines 4-15
5.
First, remove the screw in the metal keyboard support. Then lift the metal key-
board supports from the chassis.
Bridge Battery, CMOS Battery, Buzzer
Remove the bridge battery, CMOS battery, and/or buzzer (speaker) as follows.
1.
Remove the following as previously described:
LCD
top cover
keyboard
LCD status bar
VersaGlide
2.
To remove the bridge battery, disconnect the cable from connector P9 on the I/O
board and remove the bridge battery.
3.
Remove the CMOS battery as follows.
Locate the cable on the CMOS battery.
Disconnect the cable from connector P8 on the I/O board and lift the CMOS
battery out of the base unit.
Figure 4-12 Removing Bridge Battery, CMOS Battery and Buzzer
4.
To remove the buzzer, disconnect the buzzer cable from P7 on the I/O board and
remove the buzzer.
