4-12 Field Service Guidelines
Power Button, Rear IR Assembly, Keyboard
Remove the power button, rear IR assembly and/or keyboard as follows.
1.
Remove the LCD and top cover as previously described.
2.
The power button is held in place primarily by the computer’s top cover. Once the
top cover is removed, just lift the power button out of its retaining inserts.
3.
Remove the rear IR assembly as follows.
Remove the two screws securing it in place.
Locate the rear IR assembly cable that attaches to connector P7 on the CPU
board. Use a flat-head screwdriver to push open the connector tabs.
Lift up the rear IR assembly.
Figure 4-9 Removing the Power Button, Rear IR Assembly, Keyboard