4-4 Field Service Guidelines
DISASSEMBLY AND REASSEMBLY
This subsection contains step-by-step disassembly procedures for the system. Reassembly is
the reverse of disassembly. Each procedure is supported by a simplified disassembly illus-
tration to facilitate removal. The Illustrated Parts Breakdown and parts lists for the system
unit are shown later in this subsection.
For complete disassembly of the system unit, follow the disassembly order listed in
Table 4-1. To reassemble, follow the table in reverse order.
Table 4-1 NEC Versa 6000 Series Disassembly Sequence (Models 6050MH & 6050MX)
Sequence
Part
See Page
1
Hard Disk Drive
4-5
2
Diskette Drive (installed in VersaBay II)
4-7
3
Main Battery Pack (Li-Ion type)
4-8
4
LCD and Top Cover
4-10
5
Power Button, Rear IR Assembly, Keyboard
4-12
6
LCD Status Bar, VersaGlide Assembly, 33.6 Kbps Modem
Board, Metal Keyboard Supports
4-14
7
Bridge Battery, CMOS Battery, Buzzer
4-15
8
Microphone Assembly, CPU Board, Front IR Assembly
4-16
9
Heat Shield, Sound Board
4-18
10
I/O Board
4-19
When disassembling the system unit, follow these general rules.
Turn off and disconnect all power and all options, including the AC adapter (if
connected) and battery packs (see the procedures that follow).
Do not disassemble the system into parts that are smaller than those specified in
the procedure.
Label all removed connectors. Note where the connector goes and in what posi-
tion it was installed.
