NEC VERSA 2200C Manual Download

Page: 39 / 91

Learning to Use the Hardware 2-15

Serial Devices

To install a serial device such as a printer or an external
modem, you need a cable with a female 9-pin connector.

NOTE

When you connect a printer, be sure you in-

stall the appropriate printer driver through the Win-
dows Control Panel. See the online

Windows

QuickStart Guide or Using Windows 95 for instruc-
tions on using the Control Panel.

Follow these steps to connect a serial device to your NEC
Versa 2200C.

Check that both the NEC Versa 2200C and the device
power are off.

Open the left-rear port cover and locate the serial port,
(second from left).

Align and connect the 9-pin connector with the serial
port on the system. Secure the connection with the
screws provided.

Align and connect the other end of the cable to the ap-
propriate port on the device. Secure the connections with
the screws provided.

Connect the power cable to the device and a properly
grounded wall outlet.

Turn on power to the system and then to the device.

NOTE

Make sure your device is online before trying

to use it. See the device guide for instructions.

Summary of Contents for VERSA 2200C




























































































Search results

Summary of Contents for VERSA 2200C

Reviews:

Related manuals for VERSA 2200C

Brands by name

Popular brands

NEC VERSA 2200C, Manual

Search results

Summary of Contents for VERSA 2200C

Reviews:

Related manuals for VERSA 2200C

Brands by name

Popular brands