NEC V850/SF1 User Manual Download Page 5

Page: 5 / 35

User’s Manual U15447EJ1V0UM

INTRODUCTION

Target Readers

This manual is intended for users who design and develop application systems using

the V850/SF1™.

Purpose

The purpose of this manual is to describe the proper operation of the IE-703079-MC-

EM1 and its basic specifications.

Organization

This manual is divided into the following parts.

• Overview

• Names and functions of components

• Cautions

How to Read This Manual

It is assumed that the reader of this manual has general knowledge in the fields of

electrical engineering, logic circuits, and microcontrollers.

The IE-703079-MC-EM1 is used connected to the IE-703002-MC in-circuit emulator.

This manual explains the basic setup procedure and switch settings of the IE-

703002-MC when it is connected to the IE-703079-MC-EM1. For the names and

functions of parts, and the connection of elements, refer to the

IE-703002-MC User’s

Manual (U11595E)

To learn about the basic specifications and operation methods

→

Read this manual in the order of the

CONTENTS

To learn the operation methods and command functions, etc., of the IE-703002-MC

and IE-703079-MC-EM1

→

Read the user’s manual of the debugger (sold separately) that is used.

Conventions

Note:

Footnote for item marked with

Note

in the text

Caution:

Information requiring particular attention

Remark:

Supplementary information

Numeral representation: Binary

…

xxxx or xxxxB

Decimal

…

xxxx

Hexadecimal

…

xxxxH

Prefix indicating the power of 2 (address space, memory capacity):

K (kilo):

= 1024

M (mega):

= 1024

Terminology

The meanings of terms used in this manual are listed below.

Target device

The device that is targeted for emulation.

Target system

The system (user-built system) that is targeted for debugging. This

includes the target program and user-configured hardware.

Summary of Contents for V850/SF1




































Search results

Summary of Contents for V850/SF1

Reviews:

Related manuals for V850/SF1

Brands by name

Popular brands

NEC V850/SF1, User Manual

Search results

Summary of Contents for V850/SF1

Reviews:

Related manuals for V850/SF1

Brands by name

Popular brands