NEC UX5000, Easy Setup Manual, Page: 33 / 68

Chapter 2 - MH240 Setup
Chapter 2 2 - 9
2.1.1.6.8 Set the Gateway:
✎
Required only if the Fixed IP address option is selected above.
For DHCP, skip this step as it is automatically configured.
Factory Default: -
1. Press
3 (Gateway)
to go to the Gateway edit screen.
2. Edit the Gateway you want and then press the “
OK
” soft key.
3. Continue with the next feature or press the
Power/On-Hook
key and
2
to save.
Pressing the Power/On-Hook key and 1 will cancel any entered changes.
2.1.1.6.9 Set the DNS Primary:
✎
Required only if the Fixed IP address option is selected above.
For DHCP, skip this step as it is automatically configured.
Factory Default: -
1. Press
4 (DNS Primary)
to go to the DNS Primary edit screen.
2. Edit the DNS Primary you want and then press the “
OK
” soft key.
3. Continue with the next feature or press the
Power/On-Hook
key and
2
to save.
Pressing the Power/On-Hook key and 1 will cancel any entered changes.
2.1.1.6.10 Set the DNS Secondary:
✎
Required only if the Fixed IP address option is selected above.
For DHCP, skip this step as it is automatically configured.
Factory Default: -
1. Press
5 (DNS Secondary)
to go to the DNS Secondary edit screen.
2. Edit the DNS Secondary you want and then press the “
OK
” soft key.
3. Press
HOLD
as needed to exit back to the Pro fi le Setting ( Prof. Setting ) screen.
4. Continue with the next feature or press the
Power/On-Hook
key and
2
to save.
Pressing the Power/On-Hook key and 1 will cancel any entered changes.