NEC UX5000, Easy Setup Manual

Page: 31 / 68

Chapter 2 - MH240 Setup
Chapter 2 2 - 7
WPA2: TLS: Factory Default: WPA2-PSK (1.NEC-SETUP), OPEN (2 to 9)
1. Press
3 (Security)
to go to the Security setting screen.
2. Press
▲
▼
to select “WPA2” and then press the round
OK
key.
3. Press
▲
▼
to select an encryption “1.TKIP” or “2.AES” and then press the round
OK
key.
4. Press
1 (EAP) + 1 (TLS)
to set EAP type to TLS.
5. Press
2 (Identity)
to go to the Identity edit screen.
6. Edit the Identity and then press the “
OK
” soft key.
7. Press
4 (Password)
to go Password edit screen.
8. Edit the Password and then press the “
OK
” soft key.
9. Press
5 (CA Cert.) + 1 (Set Cert.)
then “
OK
” to set CA Certi fi cate (cacrt.pem).
10. Press
6 (User Cert.) + 1 (Set Cert.)
then “
OK
” to set User Certi fi cate
(usercrt.pem).
11. Press
7 (Private Key) + 1 (Set Cert.)
then “
OK
” to set Private Key (userkey.pem).
12. Press
HOLD
as needed to exit back to the Pro fi le Setting ( Prof. Setting ) screen.
13. Continue with the next feature or press the
Power/On-Hook
key and
2
to save.
Pressing the Power/On-Hook key and 1 will cancel any entered changes.
NOTE: You should upload CA Certificate “cacrt.pem”, User Certificate “usercrt.pem” and
Private Key “userkey.pem” to MH240 in advance by using IP Phone Manager for
MH240.