4 About US110
Do not place the US110 in the following places. Placing the US110 in such places may cause
malfunctions of the US110.
Places with drastic changes in temperature (e.g., near a heater, air conditioner, or
refrigerator)
Places with strong vibration
Places where corrosive gases (sulfur dioxide, hydrogen sulfide, nitrogen dioxide, chlorine,
ammonia, ozone, etc) exist. Also, the place where the air (or dust) includes components
accelerating corrosion (ex. sulfur, sodium chloride) or conductive metals.
Place where chemicals are nearby, or chemicals may be sprayed accidentally.
On a non-antistatic carpet
Places with possibilities of falling objects
Places where the power cord or interface cable may be stepped on or stumbled
Places near a device generating intense magnetic field (such as a TV, radio,
broadcast/communication antenna, power transmission wire, and electromagnetic crane)
(If unavoidable, contact your service representative to request proper shield construction.)
Places where a power outlet that shares the ground line with another (especially the one to
which a device with large power consumption is connected) must be used for the US110
Places near equipment that generates power noise (e.g., contact spark at power-on/power-
off of commercial power supply through a relay). (To install the US110 near equipment
that generates power noise, ask your service representative for separating the power
wiring or installing a noise filter.)