manualshive.com logo in svg

NEC US110, User Manual, Page: 19 / 164

Share
Download
NEC US110 User Manual Download Page 19

Chapter 1

About US110

This chapter describes how to install, connect, and shutdown the US110.

Names and Functions of Components

Names and functions of components are described below. Any other components than described
here are not used in the US110.

Front View

1

POWER lamp (green/amber)

Lights in green while the US110 is powered on.
Lights in amber while the US110 is in power-saving mode.

2

POWER switch

Press this switch to power on/off the US110. Pressing this switch once lights the POWER lamp
to indicate the US110 is powered. Pressing it again causes the shutdown confirmation
message to appear. To shutdown the US110 forcibly, press and hold this switch for at least four
seconds.

3

USB connector

Connect a device having the USB interface to this connector.

4

LINE-OUT connector

Connect a device having the LINE-IN terminal (such as headphone or PC speaker) to this
connector.

5

Microphone connector

Connect a microphone to this connector.

1

3

4

5

2

Summary of Contents for US110





































































































































































Reviews:

No comments