Issue 1.0
3-2
Upgrading the UT880
3.
Copy upgrade file to the USB drive.
4.
Remove the USB drive from support PC.
5.
Insert the USB drive into UT880. There is a USB slot for this drive located
underneath the phone.
6.
Go to
desk top
of the UT800.
7.
Choose the
Applications
icon at the bottom-center of the desktop.
8.
Start
Open Manager
.
9.
Press the
Left Arrow
icon at top of screen until you are at the
root
or
/
.
10.
Press
Storage
then
USB0
, this should take you to the USB Drive.
11.
Choose upgrade
.apk
file. When prompted, agree to the service conditions and
choose to install.
S
ECTION
2
U
PDATING
THE
UT880 S
YSTEM
F
IRMWARE
UT880 firmware update can only be downloaded via the Internet from the settings
page of the phone so UT880 access to the Internet is required.
To update the firmware:
1.
Go to
desk top
of the UT800.
2.
Choose the
Applications
icon at the bottom-center of the desktop.
3.
Choose
Settings
, then select
About Tablet
.
4.
Choose
System update
s then
Check now
. If an update is available you will be
prompted to download the update. If no update is required the phone will state
your system is up to date and no further action is required.
5.
Once the download has finished you will be prompted to install the update.
6.
The update will take several minutes to finish during which it will reboot. None of
the Multiline Telephone application settings are lost during this process.
Summary of Contents for Univerge SV9100
