NEC Univerge SV9100, Setup Manual

Page: 19 / 36

Issue 1.0
SV9100 Dialer Setup Guide (Multiline Telephone) 2-5
S
ECTION
2 M
ULTILINE
T
ELEPHONE
A
PPLICATION
A
UTOMATIC
C
ONFIGURATION
The Multiline Telephone application Dialer Application (App) may be automatically
configured for you during install. When pre-configured, the App shows online status
of your user, depending on the following conditions:

Device has network connectivity.

Device has network access to the PBX.

The PBX is configured to allow use by the device.
If the device is not configured automatically then you have two options. One is to
configure the PBX information based on the information provided by your IT support
team, and let the PBX configure the App similar to any other
Dterm
®
phone.
To open the screen with Accounts information. Once the accounts screen is open,
click on the “+” to add an account, or click on an existing account to open the items
shown in
Figure 2-2 . Each field is described in detail in Table 2-1 Account
Provisioning Parameters in the UT880 Dialer Phone App .
Figure 2-1 Multiline Telephone application showing “Online” Status for the extension