NEC Univerge SV9100 User Manual Download Page 57

Page: 57 / 77

4. Dial

-OR-

5. Dial the number you want to call.

Note:

If you hear “stutter” dial tone after dial
the number, ARS is requesting that you
enter an Automatic Route Selection
Authorization Code.

AUTOMATIC CALL DISTRIBUTION
(ACD)

Agent Log In

To log in:

1. Press the

ACD LOG IN/LOG OUT

key (Service

Code 752: *10).

-OR-

Press the

Speaker

key and dial the Log In Service

Code (Default *5).

2. Dial the log in code (up to 20 digits).

Note:

This step is not required if the ID code is
disabled.

AIC Agent Log In

To log in:

1. Press the

ACD LOG IN/LOG OUT

key (Service

Code 752: *10).

-OR-

Press the

Speaker

key and dial the

AIC Log In

service code – not assigned at default.

2. Dial the log in code (up to 20 digits).

Note:

This step is not required if the ID code is
disabled.

3. Dial the

Agent Identity Code

(AIC – up to four

digits).

12345678 STA 12345678

WAIT ACD LOGIN G:01

List Dir VMsg



12345678 STA 12345678

GROUP No: 01

(1:Yes; 0:No)

ACD LOGOUT?

INPUT AIC

List Dir VMsg



Display before Agent login

Display after Agent login

Agent Log Out display

Summary of Contents for Univerge SV9100














































































Search results

Summary of Contents for Univerge SV9100

Reviews:

Brands by name

Popular brands

NEC Univerge SV9100, User Manual

Search results

Summary of Contents for Univerge SV9100

Reviews:

Brands by name

Popular brands