NEC Univerge SV9100, User Manual

Page: 38 / 77

32
Trunk Queuing
After pressing a busy Line key and receiving the trunk
busy indication:
1. Dial # or press Trunk Queuing/Camp On key
(Service Code 751:35).
2. Replace the handset.
Note:
When a line is available, your telephone will
ring; lift the handset and place the call.
Last CO/PBX Number Redial
1. Without lifting the handset,
press the Redial key.
2. To redial the last number, press # .
-OR-
Search for the desired number from the Redial List by
pressing the List Softkey and then the Redial
Softkey .
3. Press the Up Arrow/Down Arrow or VOLUME UP/
VOLUME DOWN keys to search for the desired
number.
4. Lift the handset or press Speaker to place the call.
Speed Dial – System/Group/Station
To dial a Station Speed Dial number:
1. Press the Speaker key.
2. Dial #7 (default Service Code).
Note:
To preselect, press a Line key in step 1
(instead of Speaker).
3. Dial the Station Speed Dial buffer number (0~9):
1 = Station Speed Dial buffer 1
2 = Station Speed Dial buffer 2
:
:
0 = Station Speed Dial buffer 10
Note 1:
The stored number dials out.
Note 2:
Unless you preselect, Trunk Group Routing
selects the trunk for the call. The system may
optionally select a specific Trunk Group for
the call.
Note 3:
If you have a DSS Console, you may be able to
press a DSS Console key to chain to a stored
number.
Redial CID
LIST MENU