Page
58
of
60
Transfer (continued)
Transferring a Call Into a Conference/Existing Call:
1. While on a call, press Transfer and dial service code
624
.
The display shows the Transfer to Conf. ICM Dial.
2. Enter the extension number of the co-worker currently on a Conference call to which the call
should be transferred.
To cancel the transfer, press the flashing line key to retrieve the call.
If an error tone is heard, Barge-In is not enabled for the extension and the call does not
go through . Press the flashing line key to retrieve the call or hang up, and the call
recalls the extension.
3. The transferred call is incorporated into the conference call.
The callers hear the Barge-In tone if enabled.
If a call is transferred into a Barge-In Conference, the Conference becomes a regular 4-
party Conference call.
4. Hang up.
Transferring a Call to a Trunk Ring Group:
1. While on a call, press Transfer.
2. Dial the Transfer to Ring Group service code defined in Program 11-15-09.
You hear confirmation tone.
3. Hang up.
Transferring an Intercom or Trunk Call using a DSS/One-Touch Key:
1. While on a call, press the
DSS/One-Touch
key.
2. Announce the call or hang up.
Summary of Contents for Univerge SV9100
Page 1: ......
