Page
18
of
60
Conference lets an extension user add
additional inside and outside callers to
their conversation. With Conference, a
user can set up a multiple-party
telephone meeting without leaving the
office.
Conference
Operation
To establish a Conference:
Multiline Terminal
1. Establish intercom or trunk call.
2. Press
Conf
or
Conf
softkey
3. Dial the extension you want to add.
- OR -
Access outside call.
- OR -
Retrieve call from Park orbit.
4. When called party answers, press the
Add
softkey or
Conf
twice.
*
If you cannot add additional parties to your Conference, you have exceeded the system
Conference limit.
*
If the call being added is busy/unanswered: With an outside call, press the line or Call
Appearance (CAP) key for a call previously added to the Conference. The unanswered call drops
and the initiator is back into the Conference call.
*
Adding an Intercom call to an outside Conference call: Press the Conf softkey on the multiline
terminal display or Conf twice to re-establish the Conference. If using a non-display telephone,
press Conf twice.
With only Intercom calls in the Conference: Press Conf twice to re-establish
the Conference. If the voice mail answers, there is no way to drop that extension out. You must
drop the Conference call.
5. Repeat steps 2~4 to add more parties.
Summary of Contents for Univerge SV9100
Page 1: ......
