NEC Univerge SV8100, System Maintenance Manual, Page: 71 / 78

UNIVERGE SV8100 Issue 1.0
System Maintenance Manual 3 - 31
S
ECTION
12
SV8100N
ET
T
RACE
(N
WINFO
D
EBUG
L
IGHT
)
The following trace shows an SV8100Net trace of a call from extension port 01 that
dials a remote extension: 200. It is useful to monitor the Network ID and IP Address
used for SV8100Net calls.
You will find that the SV8100 activity can also be monitored with the ISDN debug
trace (mail in 0 0 1 2). Refer to
Section 13 SV8100Net Trace Using the ISDN Debug
Trace (Mail in 0012) on page 3-34 .
10:41:26 >>nwinfo debug light
** Networking Light Weight debug flag is turned ON **
10:41:32 >>ACD Data Size error. or socket close...
<<< KAN : sta_org_target_dial_set >>> sta_port:0401h, dial:0000h
* NwInfo> Call is generated as 1
<<< KAN : sta_org_target_dial_set >>> sta_port:0401h, dial:0aa2h
* NwInfo> CNETWORK_MAIN is called.[7c01]
* NwInfo> Search Free Resource...* NwInfo> [00000aa2] -> Networking System ID :
[1]
* NwInfo> IP Address: 0f0010ac
* NwInfo> Port: 1730
* NwInfo> We can use RSRC No. 1 !
* NwInfo> Choose VoIP Networking ! target:172. 16. 0. 15
* NwInfo> Free RsrcID is found port #01.
* NwInfo> cnetwork_pro00 is called
<<< prgrd1501.cpp(38) read_s_sta_clip_enable >>> port : 0, data : 1
* NwInfo> create_network_packet( rsrc_id_w:1 bid:7 rsrc:1 line:1)
* NwInfo> **<!>** Caller ID Œã“ú’²®!! **<!>**
* NwInfo> Networking Resource type is H.323 Interface
* NwInfo> IP Address: 0f0010ac
* NwInfo> Port: 1730
* NwInfo> Status is changed...(7c01) 0000 -> 00b6
cnetmain src:7c01 oldSrcPort:0401->src_port_w:0401 rsrc:1(H323)
status 0000 -> 00b6
Tone information for port E001H
Timeslot : 0101H
Level : Tx=20H, Rx=20H
Current : 0000H Level=20H
Sender : Not opened
* NwInfo> CNETWORK_MAIN is called.[7c01]
* NwInfo> cnetwork_pro06 is called
* NwInfo> Status is changed...(7c01) 00b6 -> 00b9
cnetmain src:7c01 oldSrcPort:0401->src_port_w:0401 rsrc:1(H323)
status 00b6 -> 00b9
* NwInfo> CNETWORK_MAIN is called.[7c01]
* NwInfo> cnetwork_pro09 is called
* NwInfo> get_inter_signal_target( 0802H ) called
* NwInfo> send_internal_signal : target=0401 third=0000
response_while_frouting Selfport = 7c01 Target = 401 signal = 802
* NwInfo> Status is changed...(7c01) 00b9 -> 0024
cnetmain src:7c01 oldSrcPort:0401->src_port_w:0401 rsrc:1(H323)
status 00b9 -> 0024
Keyphone port 1
Dials 200.
The SV8100 routes
the call to Network ID 1
to IP Address
172.16.0.15