NEC Univerge MH250 User Manual Download Page 74

Page: 74 / 112

• TIME ADJUSTMENT MEANS

Factory Default: Real Time Clock (RTC)

The handset can use one of the following to adjust the
time information. In default, time adjustment will not
be performed.

•

RTC

•

SIP server

•

SNTP server

- Press

soft key in standby mode to display

the main menu.

- Press

key to select “04. Setting” and then press

soft key.

- The handset displays the Setting menu.
- Press

key to select “03. Date & Time”.

- Press

soft key to open Date & Time

menu.

- Press

key to select “05. Adjust” and then press

soft key.

- Select “01. Means” by using key and then press

soft key.

- Select an appropriate item by using key and then

press

soft key.

Note:

Time adjustment means are as follows:

Func

PM 02:58

Exit

Menu

02. Phone Book
03. Speed Dial

01. Call Log

04. Setting

PM 02:58

Back

Setting

02. Sounds

03. Date & Time

01. Display

04. Password
05. Language

OFF

RTC: No adjustment (internal Real Time Clock is used).

From SIP: Receives time information from SIP server.

From SNTP: Receives time information from SNTP
server.

PM 02:58

Back

Date & Time

03. Time Format
04. Daylight Saving

02. Date Format

05. Adjust

PM 02:58

Back

Adjust

02. SNTP Adjust at
03. Time Offset

01. Means

PM 02:58

Back

Means

From SIP

From SNTP

RTC

Summary of Contents for Univerge MH250

















































































































Search results

Summary of Contents for Univerge MH250

Reviews:

NEC Univerge MH250, User Manual, Page: 74 / 112

Search results

Summary of Contents for Univerge MH250

Reviews: