NEC Univerge MH250 User Manual Download Page 107

Page: 107 / 112

15.

ROUBLE

HOOTING

• MESSAGE MEANINGS AND SUGGESTIONS

The following shows the meaning and suggestions of messages that may be displayed on the MH250.

MESSAGE

MEANING & SUGGESTIONS

[Connection Failed]
Duplicate IP address found

The IP address of the handset is conflicting with another device. If this is displayed,
please contact your network administrator.

[Password]
Incorrect Password

The entered password is not correct. Enter the correct password.

[Low Battery]
Please charge

Battery charge level is low. Charge the battery.

[Phone Book]
There is no number for this entry

This message appears when attempting to make a call from an entry in Phone book, if
the Phone number has not been registered for the entry. Before making a call, register
the phone number.

[Phone Book]
Phone book is full

The number of entries reaches the maximum. To add new entry, delete some entries in
advance.

[Key Lock]
Key locked

Displayed when the handset is locked.

[Key Lock]
Key unlocked

Displayed when the handset is unlocked.

[Phone Book]
Cannot delete

Phone book for the administrator cannot be deleted.

[Phone Book]
Cannot edit

Phone book for the administrator cannot be edited.

Summary of Contents for Univerge MH250

















































































































Search results

Summary of Contents for Univerge MH250

Reviews:

Related manuals for Univerge MH250

Brands by name

Popular brands

NEC Univerge MH250, User Manual

Search results

Summary of Contents for Univerge MH250

Reviews:

Related manuals for Univerge MH250

Brands by name

Popular brands