NEC Univerge MH250, User Manual, Page: 32 / 112

14
• TO USE CALL FORWARDING - NO
RESPONSE
This feature automatically forwards an incoming call to
a predetermined destination if the call cannot reach
your phone for some reasons, such as
out of service
area or power off .
To Set:
- Enter CALL FORWARDING - NO RESPONSE
(SET) access code.
- Press key and then hear Special Dial Tone.
- Dial a phone number to which you want to forward
incoming calls and then receive Service Set Tone
(This feature has been set).
- Press key.
To Cancel:
- Enter CALL FORWARDING - NO RESPONSE
(CANCEL) access code.
- Press key and then receive Service Set Tone
(The feature has been cancelled).
• TO USE CALL FORWARDING -
BUSY
This feature automatically forward an incoming call to
a predetermined phone only when the incoming calls
encounter busy status.
To Set:
- Enter CALL FORWARDING - BUSY (SET) access
code.
- Press key and then hear Special Dial Tone.
- Dial a phone number to which you want to forward
incoming calls and then receive Service Set Tone
(This feature has been set).
- Press key.
To Cancel:
- Enter CALL FORWARDING - BUSY (CANCEL)
access code.
- Press key and then receive Service Set Tone
(The feature has been cancelled).
• TO USE CALL PICKUP
When a predetermined group (Call Pickup Group)
receive an incoming call, any member of the group can
pick up the call from his/her phone.
- When a phone in the call pickup group receives an
incoming call, the phone starts ringing.
- Enter CALL PICKUP access code and then press
key while the phone is ringing.
- The call is picked up and then connection is estab-
lished.
POWER
POWER