NEC SuperScript 4400, User Manual

Page: 62 / 143

54 SuperScript 4400 Series — User’s Guide
U
SING THE
M
ENU
T
REE
You can use the Operator Panel to set communications
channels, print forms or pages, view usage reports, use
special features, or change printer settings. (However, in
most cases, you will use your printer drivers to change
printer settings.) Follow these three basic steps to enter menu
mode and navigate through the menu tree
1.
Turn on the printer, if necessary.
2. Press Online to turn the indicator light off and take the
printer offline. The display changes from
READY
to
OFFLINE
.
3. Press Menu. The display changes to
MENU CONTROL
.
4. You navigate through the menu tree by pressing the
menu selection buttons on the operator panel.
• Press Next to go to the next item in a menu.
• Press Previous to go to the previous item in a menu.
• Press Select to go to the next menu level or to choose the
displayed setting if you are at the lowest menu level.
• Press Item to move back to the previous menu level.
• Press Menu to exit menu mode. If you changed any
network settings, you must restart the printer to validate
the new settings.
An Example of Using the Menu Tree
The Operator Panel menu tree has seven top-level menu
categories. Each category contains items you can select, and
some of these items contain even more options. These form a
menu tree, but as you navigate through the menu tree, only
the currently selected item is shown on the status display.
Checking Total Page Count
This example illustrated below shows the steps you take to
view the total page count. Follow these steps
1.
Press Online .
OFFLINE
appears on the display.
2. Press Menu .
MENU - CONTROL
appears on the display.
3. Press Next .
MENU - SETUP
appears on the display.
4. Press Next .
MENU - POSTSCRIPT
appears on the display.
5. Press Next .
MENU - PCL
appears on the display.
6. Press Next .
MENU - COMMUNICATIONS
appears on the
display.
7. Press Next .
MENU - USAGE STATUS
appears on the
display.
8. Press Select . Press Next until
TOTAL PAGE COUNT
appears on the display. appears on the display.
9. Press Select and the number of pages printed appears on
the display.
Using the Operator Panel Menu Tree
P
N
O
S
I
Online
= Item
= Select
= Next
= Previous
Key
TOTAL PAGE COUNT
CONTROL
USAGE STATUS
SETUP
POSTSCRIPT
PCL
COMMUNICATIONS
READY
OFFLINE
S
N
Press the Online
button to take the
Printer Offline
M
M
Press Menu
to enter
menu mode
Press Next to display the
next item in a menu
Press Select to move to a lower
menu or to select a setting when
you are at the lowest level in
Press Previous to display the
previous item in a menu
O
Press Item to move back
to the previous menu level
N
S
Offline
=
O
a menu
PRINT FORM
N
N
N
M = Menu