Chapter 2 Command Reference
52
•
MV and RV must be unmounted from the host.
The following notes apply to the case when joint operation with the replication management is not
performed (the I/O issuance to disk arrays is directly controlled via FC).
•
The target MV is registered in the Volume List.
•
Specifying volume of a dynamic disk is not allowed.
•
MV is a disk array under control of the self host.
•
A Volume List is not being created.
•
When specifying the combination of a volume group or a disk group with a special file name
(logical disk name), for an MV(RV), specify the same number of logical volumes that constitute
a volume group or a disk group on the specified special file name (logical disk name) side. In
this case, copying is performed in the specified order.
•
To specify a volume group, the target volume group must be active.
•
To specify a disk group, the target disk group must be active.
•
The iSM special file is not being created (the UNIX system HP-UX version only).
[ RETURN VALUE ]
0: Operation for all the paired volumes terminated normally.
1: Operation for all the paired volumes terminated abnormally.
2: Operation for some paired volumes terminated abnormally.
3: The command terminated abnormally because all or some of the paired volumes were already
in Replicate State.
[ ERRORS ]
This command terminates abnormally in the following cases.
•
A parameter is invalid.
•
The instruction fails due to a disk array error.
•
The MV is being accessed.
