Chapter 2 Command Reference
105
refer to 1.2 “Volume Types”.
-rv volume
Specify the volume of RV.
For information about the volume and volume types,
refer to 1.2 “Volume Types”.
When there is only one pair of MV and RV, this
option can be omitted.
-rvflg rv_flg
Specify the volume type specified in
-rv
.
This argument must be specified together with
-rv
.
For information about the volume and volume types,
refer to 1.2 “Volume Types”.
-file file_name
To specify multiple pairs, describe pairs of MVs and
RVs in
file_name
.
For information about the
file_name
description
format, refer to 1.3 “Replication Operation File”.
When multiple pairs are specified, if an error occurs in
any of the pairs, the process is canceled.
-rvuse rv_use
Determine when to make the RV available. This
option is effective only when the activity state of the
target pair is Replicate.
One of the following can be specified in
rv_use
.
immediate
Makes the immediate use of the RV
possible while reflecting the
difference between the MV and the
RV after Separate has been executed.
complete
Allows the RV to be used after
Separate has been executed and the
difference between the MV and the
RV has been reflected.
default
Uses the setting stored in the
replication operation option setting
file. For details of the setting, refer
to 3.1 “Replication Operation Option
Setting File”.
If this option is omitted, the operation is the same as
the operation when default is specified.
