NEC Storage Manager, Messages Handbook

Page: 59 / 710

Chapter 2 Message List
53
iSM03222: Control path access failed.
file=< aaa...a > command=(< bbb...b >)
status=(< cccccccc >)
detail=< dd-eeee >
[Classification] ERROR
[Explanation] A command error occurred. A failure may exist in the disk array.
This message is output on UNIX system.
aaa...a : Special file name
bbb...b : Command Descriptor Block of the issued command
cccccccc : Status Byte
dd-eeee : Detail information (This code is not disorder reason but a value
for maintenance.)
[Measures] Check the state of the FC connection to the disk array and the state of the disk
array, and remove the failure.
iSM03222: Control path access failed.
Disk=(disk< aaa > (Port< bbb >
Bus< ccc > Target< ddd > Lun< eee >))
command=(< fff...f >)
status=(< gggggggg >) detail=< hh-iiii >
[Classification] ERROR
[Explanation]
A command error occurred. A failure may exist in the disk array.
This message is output on Windows system.
diskaaa (Portbbb Busccc Targetddd Luneee): Disk information
fff...f
: Command Descriptor Block of the issued command
gggggggg : Status Byte
hh-iiii : Detail information (This code is not disorder reason but a value
for maintenance.)
[Measures]
Check the state of the FC connection to the disk array and the state of the disk
array, and remove the failure.