NEC Storage Manager, Messages Handbook

Page: 51 / 710

Chapter 2 Message List
45
iSM03142: Management of control path in
diskarray[< a> ] failed.file=< bbb...b >
command=(< ccc...c >)
status=(< dddddddd >) detail=< ee-ffff >
[Classification] NOTICE
[Explanation]
Failed in the inclusion of the control path.
This message is output on UNIX system.
a : Disk array specification number (1 to 64) in the environment
definition file (agent section)
bbb...b : Special file name
ccc...c : Command Descriptor Block of the issued command
dddddddd : Status Byte
ee-ffff : Detail information (This code is not disorder reason but a value
for maintenance.)
[Measures]
Check the disk array state, and remove the failure.
iSM03142: Management of control path in
diskarray[< a> ] failed.
Disk=(disk< bbb > (Port< ccc >
Bus< ddd > Target< eee > Lun< fff >))
command=(< ggg...g >)
status=(< hhhhhhhh >) detail=< ii-jjjj >
[Classification] NOTICE
[Explanation]
Failed in the inclusion of the control path.
This message is output on Windows system.
a : Disk array specification number (1 to 32) in the environment
definition file (agent section)
diskbbb (Portccc Busddd Targeteee Lunfff): Disk information
ggg...g
: Command Descriptor Block of the issued command
hhhhhhhh : Status Byte
ii-jjjj : Detail information (This code is not disorder reason but a value
for maintenance.)
[Measures]
Check the disk array state, and remove the failure.