NEC SL1100, Manual

Page: 61 / 118

SL1100 Issue 1.0
Desktop Suite 3 - 7
___________________________________________________________________________________
___________________________________________________________________________________
1.8 Park
The Park button will transfer the active call to a specific park orbit. When this
function is selected, the following dialog will be displayed (refer to
Figure 3-7
Park Call Screen ).

The spinner control allows the user to select the destination Park orbit.

With Desktop Applications users can park calls in the next available park
orbit by choosing orbit 0 when program 20-11-27 is set to 1 (on).

Selecting the Start button will place the active call in the selected Park
orbit.

The Parked Call shows up in the active call list as a blue Parked Call.

Selecting the Cancel button will close the Park Call dialog without initiating
a call park operation.

If the Park operation fails because the selected Park orbit is not available,
an error message will be displayed.
1.9 Unpark
The Unpark button will retrieve a call from a specific park orbit. When this
function is selected, the following dialog in
Figure 3-8 Unpark Call Screen , will
be displayed.
Figure 3-7 Park Call Screen
Figure 3-8 Unpark Call Screen