2. Turn the power on, enter the Program Mode then PRG90-03.
3. Dial 1 and press Hold key.
4. When the data backup to the CF card is completed, the display will be changed to the next PRG.
5. Remove the CF Card and exit from the Programming Mode.
The saved data on CF Card cannot be edited by the PC.
2.4 Loading the Customer Data
The backed up customer data can be loaded to the system by CF Card.
1. Turn the power off, insert the Customer Data CF card into the CF Slot on VMDB.
CPU card
CF Slot (CN2)
CF card
VMDB
Figure 3-10 Inserting the CF card
Program Mode
Base Service OP1 OP2
90-03-01
Data Save YES:1 1
Figure 3-11 PRG90-03 Display
Saving System Data
90-04- M
’
tenance
Load Data |01
back Select
Figure 3-12 PRG90-04 Display
ISSUE 1.0
SL1100
Hardware Manual
3-5
Summary of Contents for SL1100
