NEC SL1100, Hardware Manual

Page: 124 / 158

3. Connect the other end of the cable to your TCP/IP network.
When the base station powers on, the STATUS LED on the front briefly lights orange and then
turns off while it initializes and connects to the network. After the base station successfully initial-
izes and connects to the network, the LED lights green and remains steady on.
Table 2-27 Base Station LEDs States and Meanings on this page provides a list of base station
LEDs and their meanings.
Table 2-27 Base Station LEDs States and Meanings
Color State Meaning
Green Flickering Stage in base flash memory rewrite at the end of the base firmware update.
Green Steady on All operations normal.
N/A Off No power in unit
OR
initializing and connecting to the network.
Orange Briefly on Powering on.
Orange Flickering Stage in base flash memory rewrite at the end of the base firmware update.
Red Blinking Factory reset warning. A factory reset has been initiated or is in progress.
Red Blinking No Ethernet connection available
OR
handset registration failed.
Red Flickering Stage in base flash memory rewrite at the end of the base firmware update.
Red Steady on Critical error. Contact technical support.
6.3.2 Wall Mounting the Base Station
Follow the steps below to mount the base station to a wall.
Be sure the wall material can hold the weight of the base.
1. Hold the base in its final location and mark the screw location based on the measurements shown
in Figure 2-146 Base Mounting Dimensions on the next page .
Figure 2-145 Connecting the Base Station
ISSUE 1.0 SL1100
Installation 2-90