Note: (*) indicates default value.
1-02 : Hold Recall/Call Park Recall
This Memory Block area is used to enter the time for the Hold Recall to start (both
visual and audible). If
No Limit
is selected, there will not be any Hold Recall. This
time is used for both Exclusive and Non-Exclusive Hold.
•
Enter system programming mode
•
Press Line Key 1
•
Dial
0 2
•
Enter value
o
0 - 1 min
o
1 - 2 min(*)
o
2 - 4 min
o
3 - No limit
•
Press
MIC
to store the data
•
Press
SPKR
to go back on line
Note: (*) indicates default value
1-03 : Paging Time Out Selection
This Memory Block area is used to enter the duration of internal zone paging and
external speaker paging
•
Enter system programming mode
•
Press Line Key 1
•
Dial
0 3
•
Enter value
o
0 - 90 sec(*)
o
1 - 120 sec
o
2 - No limit
•
Press
MIC
to store the data
•
Press
SPKR
to go back on line
Note: (*) indicates default value
1-04 : CO/PBX Line Queuing Recall Time
This Memory Block area is used to enter the duration of a queued/reserved trunk that
goes unanswered
16