NEC PX2000UL Page 88 User Manual Download

Page: 88 / 111

5-1. Connecting to Other Equipment

Below is an example of connections to external equipment.
No connection cables are included with this projector. Use the appropriate cables for the connections.

CAUTION

• Be sure to turn off the projector before connecting the projector to an external device. In doing so, do not enter

the radiation zone (HD). If projected light enters your eyes, it may cause visual impairment.

• For HDMI, DisplayPort, BNC, SDI, and LAN, please use a shielded cable. Use of other cables may cause inter-

ference with radio and television reception.

Computer, etc.

Blu-ray player, etc.

HDBaseT transmission device, etc.

Professional video equip-
ment, etc.

Professional video equipment, etc.

Computer, etc.

5. Installation and Connections

Summary of Contents for PX2000UL
















































































































Search results

Summary of Contents for PX2000UL

Reviews:

Related manuals for PX2000UL

Brands by name

Popular brands

NEC PX2000UL, User Manual

Search results

Summary of Contents for PX2000UL

Reviews:

Related manuals for PX2000UL

Brands by name

Popular brands