manualshive.com logo in svg

NEC PowerMate Pro 2180, User Manual

The NEC PowerMate Pro 2180 User Manual is an essential guide that provides detailed instructions for operating and maximizing the potential of your device. Easily download this comprehensive manual for free from our website, ensuring seamless user experience and optimal performance.

Share
Download
background image

    

 3-6   Understanding System Features

PCI Local Bus

 The 32-bit industry-standard PCI bus is a highly-integrated
input/output (I/O) interface that offers the highest
performance local bus available for the Pentium-based
processor. The PCI bus supports burst modes that send
large chunks of data across the bus, allowing fast displays
of high-resolution images.

 The high-bandwidth PCI local bus eliminates data
bottlenecks found in traditional systems, maintains
maximum performance at high clock speeds, and provides a
clear upgrade path to future technologies.

 The PCI bus contains two embedded PCI devices, the PCI
local bus IDE interface and the PCI video/graphics
controller.

Flash ROM

 NEC’s Flash ROM allows fast, economical BIOS
upgrades. NEC Flash ROMs are reprogrammable system
and video EPROMs.

 With NEC’s Flash ROM, a ROM BIOS change:

■  

is fast and easily done using a Flash utility

■  

eliminates the expensive replacement of ROM BIOS
chips, and reduces system maintenance costs

■  

reduces inadvertent system board damage that can take
place when replacing ROMs

■  

facilitates adopting new technology while maintaining
corporate standards

■  

gives network administrators company-wide control of
BIOS revisions.

 Information on how to use the Flash utility is provided in
Chapter 4, NEC Drivers and Utilities.

Summary of Contents for PowerMate Pro 2180




















































































































































































































Reviews:

No comments

Related manuals for PowerMate Pro 2180

adstec TabX ITC8113 Instruction Manual preview
TabX ITC8113
Brand: adstec Pages: 68
Gateway GT5042j Getting To Know preview
GT5042j
Brand: Gateway Pages: 2
Dell OptiPlex Tower Installation Manual preview
OptiPlex Tower
Brand: Dell Pages: 13
Casio FX-890P Owner'S Manual preview
FX-890P
Brand: Casio Pages: 126
Dell OptiPlex XE3 Setup Manual preview
OptiPlex XE3
Brand: Dell Pages: 38
Dell OptiPlex XE2 Owner'S Manual preview
OptiPlex XE2
Brand: Dell Pages: 61
Dell OptiPlex XE3 Service Manual preview
OptiPlex XE3
Brand: Dell Pages: 70
Dell Precision 450N Setup And Quick Reference Manual preview
Precision 450N
Brand: Dell Pages: 208
Dell Precision 8F765 Setup And Quick Reference Manual preview
Precision 8F765
Brand: Dell Pages: 260
Dell Precision 8F764 Setup And Quick Reference Manual preview
Precision 8F764
Brand: Dell Pages: 152
Dell Precision M2800 Owner'S Manual preview
Precision M2800
Brand: Dell Pages: 81
Dell Precision D490 Quick Reference Manual preview
Precision D490
Brand: Dell Pages: 124
Dell Precision 8T146 Setup And Quick Reference Manual preview
Precision 8T146
Brand: Dell Pages: 96
Dell Precision 9T217 Setup And Quick Reference Manual preview
Precision 9T217
Brand: Dell Pages: 170
Dell Precision K8642 Quick Reference Manual preview
Precision K8642
Brand: Dell Pages: 138
Dell Precision JD967 Quick Reference Manual preview
Precision JD967
Brand: Dell Pages: 240
Dell P104F Service Manual preview
P104F
Brand: Dell Pages: 113
Dell Precision G0427 Setup And Quick Reference Manual preview
Precision G0427
Brand: Dell Pages: 94

Brands by name

Popular brands

Load more brands