NEC PowerMate Pro 2180, User Manual, Page: 163 / 211

6-6 Setting System Board Jumpers
BIOS Recovery
Recovery Mode 2-4
Normal Operation 4-6
(default)
1
5
9
2
6
10
Jumpers
1
5
9
2
6
10
BIOS Recovery Jumper
6.
Replace the system unit cover (see “Replacing the
System Unit Cover” in Chapter 5).
7. Connect system power cables and monitor.
8.
Power on the system. The system displays a system
configuration error message.
9. Power off, unplug the system and monitor, and remove
the cover.
10.
Remove the jumper block from pins 2-4 and replace it
on pins 4-6.
11. If you removed any expansion boards, replace them
(see “Replacing Expansion Boards” in Chapter 5).
12.
Replace the system unit cover. Reconnect the system
power cables and peripheral devices.
13.
Power on the system.
14.
Run Setup (see Chapter 4, NEC Drivers and Utilities).
CLEARING CMOS
If you want to return your system to the factory default
settings, use the following procedure to clear CMOS to the
default factory settings.