NEC PowerMate ES 5250 Series Release Notes 3
Install LANDesk Client Manager alone and before installing the
Cheyenne
®
Backup utility, NEC Configuration Change Notification,
NEC Auto Backup utility, or NEC WebTelligent™ software.
NEC Configuration Change Notification, NEC Auto Backup utility, and
NEC WebTelligent are NEC ToolTelligent™ software components.
Note:
LANDesk Client Manager should be installed
before any of the applications or utilities that function in
conjunction with it. Install the Cheyenne Backup utility, the
NEC Configuration Change Notification, NEC Auto Backup
utility, and the NEC WebTelligent software after installing
LANDesk Client Manager.
Do not install both the NEC SNMP Agent and LANDesk Client Manager
on the same computer. The two applications are incompatible. If both
NEC SNMP Agent and LANDesk Client Manager are installed, it is not
possible to remove either application. To remove them, a full restore must
be performed after which all applications must be reinstalled.
!
CAUTION
Do not install both the NEC SNMP Agent and LANDesk
Client Manager on the same computer.
The installation and operation of the NEC Help Center requires the
installation of Microsoft Internet Explorer 4.01 or 5.0.
Note:
If you attempt to install the NEC Help Center
without either version of Internet Explorer on your system,
the Help Center setup program prompts you to install
Internet Explorer 4.01. The NEC Help Center is designed to
work with Internet Explorer version 4.01 or higher.
See “NEC Application and Driver CD” in Chapter 3 of the PowerMate ES 5250
Series User’s Guide for detailed information about installing applications from
the Application and Driver CD.
