NEC POWERMATE ES 5250 - S Manual Download Page 39

Page: 39 / 276

Setting Up the System 2-3

See your network administrator for guidelines on
configuring the system for network access.

Set the voltage switch correctly for your area. The correct
setting for the U.S. and Canada is 115V.

WARNING

Set the voltage switch correctly for your area.

Connect system power connectors to a surge protector
(recommended) or a properly grounded wall outlet.

Note:

If the system board has been set for

Immediate Boot-Up, the system starts up as
soon as the power cord is connected. See
“Startup” and “Jumper Settings.”

CAUTION

NEC CSD recommends connecting power cables
to a surge protector.

Startup

You can start up the system in two ways:

by pressing the power button

by connecting the power cable (if the system board is
jumpered for Immediate Boot-Up).

When the system starts up, the power lamp lights green to
indicate that the system is on. The NEC startup screen
appears.

Summary of Contents for POWERMATE ES 5250 - S





















































































































































































































































































Search results

Summary of Contents for POWERMATE ES 5250 - S

Reviews:

Brands by name

Popular brands

NEC POWERMATE ES 5250 - S, Manual

Search results

Summary of Contents for POWERMATE ES 5250 - S

Reviews:

Brands by name

Popular brands