Section 4
Processor Speed Settings
This section provides jumper setting information for changing the processor speed setting
for a PowerMate Professional Series system.
The information in this section applies to PowerMate Professional Built to Order (BTO)
systems and systems with the following model numbers:
MT-2550-24874X
MT-2560-24874X
MT-2560-24874C
MT-2560-2784S
MT-2560-2785S.
The system board must be configured for the frequency of the installed processor and the
corresponding host bus, PCI bus, and ISA bus frequencies. This jumper should be set
correctly at the factory for the system.
The following procedure explains how to locate and change the processor speed jumper
setting in the unlikely event that it is not set correctly at the factory.
For other jumper setting information, see the PowerMate Professional Series Service and
Reference Manual (819-181764-000).
CAUTION:
Jumpers are set correctly at the factory
for the configuration.
If the system requires a jumper change, change
only the setting for that condition. Otherwise,
keep the settings at their factory settings.
Summary of Contents for POWERMATE ENTERPRISE - 09-1997
Page 31: ...Index 2 ...
