Getting started
10
ENGLISH
Getting started
Before you make any connections, switch off all the relevant appliances, including the plasma TV.
Unpacking, viewing, locating and installing
Unpacking
.
Place the box upright with its underside on a solid base. The direction of the arrowheads on the long side of the box
indicates the top of the box.
.
Remove the packaging tape from the opening edge and open the box’s flap outwards.
.
Remove the two top polystyrene packing corners and take the accessories box out of the packing. This is located on the
side at the rear of the display.
Polystyrene corner
Polystyrene corner
Viewing position
D
Although the plasma display has a large display angle, its best performance is achieved when viewed directly from a
central front position. Align the display with the most frequent viewing position.
Location
D
Light reflection
Avoid placing the display opposite windows or other light sources.
D
Access to the mains input
The mains input and mains switch should be easily accessible at all times.
D
Air supply
Leave a space at the side and to the rear of at least 100 mm from any furniture. The space above the unit should be at
least 300 mm from any furniture or the ceiling.
With the wall mounting the space must above at least 800 mm to any furniture or to the ceiling. Laterally and down you
should keep to a least space of 100 mm.
D
Ambient temperature
To ensure safe, reliable operation the ambient temperature must be between 5 °C and 35 °C.
