3
P a n e l 1 7
Normal Setting Mode Printing Out the Memory
Setting
To print out the current ‘memory switch settings,
these
Load
continuous
into the
and enter the memory switch menumode.
Select the
loading method in the
setting
The
will enter the normal setting mode
selectinp the desired
loading method in the
setting mode, and print out the menu of the normal
seeting mode.
Press
to
“F’ (Group F “PRINT RESET
with the
Press
MODE
twice. The
will print out the current memory switch
After printin “Mode Ex&?
question at the end of the current memory
switch settings, press
MODE. The
prints’the main menu of the normal
setting mode.
Turn
Printer off to quit
menu mode.
The following
the memory switch settings for the
at the factory.
O P T I O N
A. PRINT
OF
l
1
FEED
CR
LF
PAPER
CENTRE
LEFT
0.
l
2
NO
C U
l
l
’ The hex
mode
l
4 Distance from the top edge of the paper to the
available only once when setting to
and
middle of the first print line.
the
Printer, then
it on again.
The left margin
only
The factory default setting of the
is
when the current
method is set
The factory
setting of the
is
to
in the
setting
