Manufacturer’s Instructions and User’s Responsibility to Prevent Radio
Frequency Interference
Manufacturer’s Instructions
The user must observe the followinp precautions in installing and operating this device:
1. Operate the equipment in strict accordance with the manufacturer’s instructions
for the model.
2. Plug the unit into a properly-grounded wall outlet and use the power cord supplied
with the unit, unmodified.
3.
4.
Always operate the unit with the factory-installed cover on the unit.
Make no modification to the equipment which would cause radio frequency
interference.
5. Maintain the equipment in a satisfactory state of repair.
6. Use a shielded and properly-grounded I/O cable to prevent radio frequency
interference.
User’s Responsibility
The user is ultimately responsible for correcting problems that arise from harmful radio-
frequency emissions from equipment under the user’s control. If this equipment does
cause interference to radio or television reception (which can be determined by turning
the equipment off and on), the user is encouraged to try to correct the interference by one
of the followinp measures. All of these responsibilities and any others not mentioned are
exclusively at the expense of the user.
1. Change in orientation of the receiving device antenna.
2. Change in orientation of the equipment.
3. Change in location of equipment.
4. Change in equipment power source.
