13
2. Projecting an Image (Basic Operation)
Connecting Your Computer/Connecting the Power Cord
#ONNECTYOURCOMPUTERTOTHEPROJECTOR
This section will show you a basic connection to a computer. For information about other connections, see “(2)
Making Connections” on page
143
.
Connect the computer cable (VGA) between the projector’s COMPUTER IN connector and the computer’s port
(mini D-Sub 15 Pin). Turn two thumb screws of both connectors to fix the computer cable (VGA).
#ONNECTTHESUPPLIEDPOWERCORDTOTHEPROJECTOR
First connect the supplied power cord’s three-pin plug to the AC IN of the projector, and then connect the other
plug of the supplied power cord in the wall outlet.
The projector’s power indicator will light orange* (standby mode).
The STATUS indicator will also light green*.
* This will apply for both indicators when [NORMAL] is selected for [STANDBY MODE]. See the Power Indicator
section.(
m
page
214
)
COMPUTER IN
Make sure that the prongs are fully inserted into
both the AC IN and the wall outlet.
To wall outlet
CAUTION:
0ARTSOFTHEPROJECTORMAYBECOMETEMPORARILYHEATEDIFTHEPROJECTORISTURNEDOFFWITHTHE0/7%2BUTTONORIFTHE
!#POWERSUPPLYISDISCONNECTEDDURINGNORMALPROJECTOROPERATION
5SECAUTIONWHENPICKINGUPTHEPROJECTOR
