NEC P547UL User Manual Download Page 84

Page: 84 / 174

4. Using On-Screen Menu

4-5. Menu Descriptions & Functions [SETUP]

[GENERAL]

Using the Wall Color Correction [WALL COLOR]

This function allows for quick adaptive color correction in applications where the screen material

is not white.

NOTE:
• Selecting [WHITEBOARD] reduces brightness.

Eco mode selection and brightness adjustment [LIGHT MODE]

Adjusting the energy savings settings and the brightness of each projector in multi-screen projection.

For energy savings settings, see page

“3-4 Changing Eco Mode/Checking Energy-Saving Effect”.

ECO MODE

OFF

The light module luminance (brightness) will be at the setup brightness for
[ADJUST].

ECO

By controlling the brightness and fan speed, energy can be saved and motion noise
and the power consumption can be lowered.

LONG LIFE

The mode optimizes the service life of the light module.

ADJUST

Brightness can be adjusted in 1% increments from 50 to 100%.
When several projectors are used for multi-screen projection, the brightness can be
adjusted individually on each projector.
The adjustment is valid when [ECO MODE] is set to [OFF].

Summary of Contents for P547UL















































































































































































Search results

Summary of Contents for P547UL

Reviews:

Brands by name

Popular brands

NEC P547UL, User Manual

Search results

Summary of Contents for P547UL

Reviews:

Brands by name

Popular brands