manualshive.com logo in svg

NEC P547UL, User Manual

Share
Download
NEC P547UL User Manual Download Page 132

7. Connecting to a Network

111

7-3. NETWORK SETTINGS

Move the cursor to [  NETWORK SETTINGS] at the bottom right of the start-up screen and press 

the ENTER button to display the [NETWORK SETTINGS] screen.

⑤

⑥

①

②

③

④

Important: For customers connecting the projector to a network

The default [WIRED LAN] setting of this projector is set to [DISABLE (PROFILES)] when it is shipped from the factory. To connect to 
a network, display the on-screen menu and change the [WIRED LAN] profile setting in the [NETWORK SETTINGS] from [DISABLE] 
to [ENABLE] to enable the wired LAN.
When you select [WIRED LAN] or [WIRELESS LAN] in the on-screen menu for the first time after purchasing the projector, the 
[NETWORK PASSWORD] setting screen will appear. In this case, follow the operating procedure shown below.

1. Select [SETUP] 

→

 [INSTALLATION] 

→

 [NETWORK 

SETTINGS] in the on-screen menu.

The [NETWORK SETTINGS] screen is displayed.

2. Select [WIRED LAN] or [WIRELESS LAN] and press 

the ENTER button.

The [NETWORK PASSWORD] setting screen is displayed.

Summary of Contents for P547UL















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands